Products‎ > ‎

SM - Shell Mill


Our standard shell mill holders are offered in 2 versions:
  • Standard, Screw is "not" coolant thru so the customer can modify to their application
  • FX Ported Coolant System
Features:
Coolant Thru
  • Coolant Thru the Center
  • DIN AD+B Flange Coolant Included
  • FX Coolant Ports Versions Available
Dynamically Balanced
  • 30, 40 & HSK63A - G6.3 @ 20,000 RPM
  • 50 & HSK100A - G6.3 @ 15,000 RPM
ISO AT3 Taper Tolerance
  • Tapers are ground better than AT3 for optimal T.I.R.


What is FX?
Many cutter manufacturer's have standardized on what we call "Ported Coolant".  This system delivers coolant to each insert from the relief in the mounting pilot area of the cutter.
To supply coolant to this region many manufacturer's have altered mounting screws with drill holes.  This approach works but limits the amount of coolant that can be delivered to the cutter.  The size of the drilled holes are so small they cannot deliver enough coolant volume to evacuate chips at high feeds.  FX was designed to be used with the cutter manufacturer's supplied screws to increase coolant volume 400%+ for high feed cutters.



Why not add flats to the cutter mounting screw?
High feed cutters are run at much higher RPM's.  By adding flats to the screw, the screw is weakened and failure "has" occurred.   

SelectionFile type iconFile nameDescriptionSizeRevisionTimeUser